High frequency transformer manufacturing process points

1.Bobbin Parameters: Determine the correct parameters for the bobbin.
2.Winding Guidelines:
1.Winding should be flat and non-overlapping.
2.For single-group winding, use a single color wire. For double-group winding, use two-color wire or different wires to avoid confusion.
3.Straddling Line Isolation:
1.Ensure the winding is even and well-spaced.
2.Wrap wires tightly and evenly.
3.Maintain a safe distance between the coil and winding groove edges.
4.Sleeve Length:
1.The sleeve should extend into the safety tape and beyond the bobbin surface but not close to the pin.
5.Tape Placement:
1.The outermost tape should cover the combined surface of the iron core.
2.Tape should be flush with the winding groove, not skewed, folded, or damaged.
6.Spanning Wire Insulation:
1.The spanning wire should be taped securely to isolate it from the bottom coil.
This version keeps the key details intact while simplifying the language and structure.