スイッチング電源トランスが電圧を変更できる理由

著者: マグトップ
2022-09-23
image
スイッチング電源トランス is a kind of power transmission or an important part of signal transmission, which mainly uses the principle of electromagnetic induction to transmit power or signal from one circuit to another circuit. When the alternating current passes through the primary coil, an alternating magnetic flux is generated in the iron core (or magnetic core), and a voltage (or current) is induced in the secondary coil. の スイッチング電源トランス consists of an iron core (or magnetic core) and a coil. Coils have two or more windings. の winding connected to the power source is called the primary coil and the other windings are called the secondary coil.

Current flows in from the primary coil and out from the secondary coil. If the number of turns of the primary coil is greater than the number of turns of the secondary coil, the voltage on the secondary coil will decrease, which is a step-down low-frequency transformer; on the contrary, if the number of turns of the primary coil is less than the number of turns of the secondary coil, then the secondary coil の voltage on it will rise, which is called a boost low frequency transformer.
高周波トランスは、一次から二次への電力しか転送できないことに注意してください。電圧を増減しますが、電力は増減しません。高周波トランスの一次および二次
の ratio of the stage voltages is equal to the ratio of the secondary and primary currents. Disregarding the high frequency transformer loss, it can be said that the primary input power is equal to the secondary output power.


MagTop の主な製品は、トランス (高周波トランスフォーマ、低周波トランスフォーマ、トロイダル トランス) インダクタ (SMD インダクタ、DIP インダクタ、コモン モーク インダクタ、トロイダル インダクタ) コイル、フィルタ、RJ45 コネクタ (Rj45 シングル ポート、Rj45 マルチ ポート、RJ45 付き) です。 USB、PoE 付き RJ45) など。ようこそ当社のウェブサイトをクリックするか、お問い合わせください.