English
Pусский
Deutsch
Français
Portugues
Español
العربية
lingua italiana
日本語
Türk dili
1. 스켈레톤 스켈레톤은 일반적으로 코일을 감는 브라켓을 말합니다. 일부 더 큰 고정 인덕터 or adjustable 인덕터 (such as oscillating coils, choke coils, etc.), most of which are enameled wire (or yarn-covered wire) around the skeleton, and then the magnetic core or copper core, iron core, etc. Installed into the inner cavity of the skeleton to increase its inductance. The skeleton is usually made of plastic, bakelite, and ceramics, and can be made into different shapes according to actual needs. Small 인덕터 (such as color-coded 인덕터) generally do not use a bobbin, but instead have the enameled wire wound directly around the core. Air-core 인덕터 (also known as unwrapped coils or air-core coils, mostly used in high-frequency circuits) do not use magnetic cores, skeletons and shields, etc., but are first wound on the mold and then take off the mold, and the coil is pulled between each coil. Drive a certain distance.
2. Winding Winding refers to a group of coils with specified functions, which is the basic component of 인덕터. There are single-layer and multi-layer windings. There are two types of single-layer windings: dense winding (conductors are wound one turn after another) and intermediate winding (there is a certain distance between each turn of wires during winding); multi-layer windings have layered flat winding, random winding Winding, honeycomb winding, etc.
3. 마그네틱 코어 및 마그네틱 로드 마그네틱 코어 및 마그네틱 로드는 일반적으로 니켈-아연 페라이트(NX 시리즈) 또는 망간-아연 페라이트(MX 시리즈) 및 기타 재료로 만들어지며 "I" 모양, 기둥 모양, 모자 모양 , "E" 모양, 모양 및 기타 모양 수 있습니다.
4. 철심 철심의 재료는 주로 규소강판, 퍼멀로이 등이 있으며 그 형상은 대부분 "E"형이다.
5. Shielding cover In order to prevent the magnetic field generated by some 인덕터 from affecting the normal operation of other circuits and components, a metal screen cover (such as the oscillation coil of a semiconductor radio, etc.) is added to it. The use of shielded 인덕터 will increase the loss of the coil and reduce the Q value.
6. Packaging materials After some 인덕터 (such as color code 인덕터, color ring 인덕터, etc.) are wound, the coils and magnetic cores are sealed with packaging materials. The encapsulation material is plastic or epoxy resin.
2. Winding Winding refers to a group of coils with specified functions, which is the basic component of 인덕터. There are single-layer and multi-layer windings. There are two types of single-layer windings: dense winding (conductors are wound one turn after another) and intermediate winding (there is a certain distance between each turn of wires during winding); multi-layer windings have layered flat winding, random winding Winding, honeycomb winding, etc.
3. 마그네틱 코어 및 마그네틱 로드 마그네틱 코어 및 마그네틱 로드는 일반적으로 니켈-아연 페라이트(NX 시리즈) 또는 망간-아연 페라이트(MX 시리즈) 및 기타 재료로 만들어지며 "I" 모양, 기둥 모양, 모자 모양 , "E" 모양, 모양 및 기타 모양 수 있습니다.
4. 철심 철심의 재료는 주로 규소강판, 퍼멀로이 등이 있으며 그 형상은 대부분 "E"형이다.
5. Shielding cover In order to prevent the magnetic field generated by some 인덕터 from affecting the normal operation of other circuits and components, a metal screen cover (such as the oscillation coil of a semiconductor radio, etc.) is added to it. The use of shielded 인덕터 will increase the loss of the coil and reduce the Q value.
6. Packaging materials After some 인덕터 (such as color code 인덕터, color ring 인덕터, etc.) are wound, the coils and magnetic cores are sealed with packaging materials. The encapsulation material is plastic or epoxy resin.
