English
Pусский
Deutsch
Français
Portugues
العربية
lingua italiana
日本語
한국어
Türk dili
Él Interfaz RJ45 is usually used for data transmission and is made of eight cores. The most common application is the network card interface. The Interfaz RJ11 is similar to the Interfaz RJ45, but only has 4 pins (8 for RJ45). The following is the main difference between the Interfaz RJ45 and the Interfaz RJ11, the specific content is as follows:
The difference between Interfaz RJ45 and Interfaz RJ11 1. Debido a que RJ11 no está estandarizado internacionalmente, su tamaño, fuerza de inserción, ángulo de inserción, etc. no cumplen uniformemente con los requisitos de diseño de conector estándar internacional, por lo que no se puede garantizar la interoperabilidad. Incluso causan destrucción en ambos. Dado que un conector RJ11 es más pequeño que un conector RJ45, las piezas de plástico a ambos lados del conector dañarán las clavijas metálicas del conector en el que se inserta.
The difference between Interfaz RJ45 and Interfaz RJ11 2. Different standards and different sizes. Due to the different sizes of the two (RJ11 is 4 or 6 pins, RJ45 is an 8 pin connector), obviously the RJ45 plug cannot be inserted into the RJ11 jack. The reverse is physically possible (RJ11 plugs are smaller than RJ45 jacks), which creates the illusion that the two should or could work together. Actually not. It is strongly recommended not to use RJ11 plugs for RJ45 jacks.
producto similar:Conector pcb rj45 y conector rj45 de 90 grados y conector hembra rj45
Para más información, por favor consultecapota magnética
The difference between Interfaz RJ45 and Interfaz RJ11 1. Debido a que RJ11 no está estandarizado internacionalmente, su tamaño, fuerza de inserción, ángulo de inserción, etc. no cumplen uniformemente con los requisitos de diseño de conector estándar internacional, por lo que no se puede garantizar la interoperabilidad. Incluso causan destrucción en ambos. Dado que un conector RJ11 es más pequeño que un conector RJ45, las piezas de plástico a ambos lados del conector dañarán las clavijas metálicas del conector en el que se inserta.
The difference between Interfaz RJ45 and Interfaz RJ11 2. Different standards and different sizes. Due to the different sizes of the two (RJ11 is 4 or 6 pins, RJ45 is an 8 pin connector), obviously the RJ45 plug cannot be inserted into the RJ11 jack. The reverse is physically possible (RJ11 plugs are smaller than RJ45 jacks), which creates the illusion that the two should or could work together. Actually not. It is strongly recommended not to use RJ11 plugs for RJ45 jacks.
producto similar:Conector pcb rj45 y conector rj45 de 90 grados y conector hembra rj45
Para más información, por favor consultecapota magnética
